Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Are you seeking How To Update Chromecast Wi-Fi?? While various casting devices are available to stream media files from mobile phones and tablets to your TV or PC, Google Chromecast is one of the most portable options available today. You can take it with you wherever you go, but there is a small catch: it can only remember one Wi-Fi network at a time, which is frustrating.
If you take your Chromecast with you or have more than one Wi-Fi source in your home, you’ll need to change the Wi-Fi password regularly. Following the change, the procedure can be straightforward or a little complicated.
How To Update Chromecast Wi-Fi?
Perform a Simple Chromecast Network Switch
Providing your current network is operational, you are simply switching Chromecasts from one location to another. This is also a viable option if you’re experiencing connectivity issues on your computer.
Unfortunately, switching networks is not as straightforward as one might expect. You’ll need to forget your current network (while still connected to that network) and then re-create it to use it properly.
Make sure your smartphone (or tablet) is connected to the internet and that the television connected to your Chromecast device is turned on.
To begin, launch the Home application on your smartphone or tablet.
Select your Chromecast device by tapping on it.
To access the Settings Cog, locate it in the upper right-hand corner of the screen.
Select Wi-Fi from the drop-down menu.
To confirm that you want to forget about the current network, tap it again.
It is necessary to reconnect your Chromecast device to the internet after you have completed the preceding steps. We’ve outlined those steps in greater detail further down this page. Keep in mind that the Wi-Fi network on your Chromecast must be the same as the Wi-Fi network on your smartphone. This could be the source of the problem if you receive the error message.
Setup Chromecast for New Modem or Router
It is not possible to connect your Android or iPhone to your Chromecast after you have changed your network settings.
If this is the case, the best action is to reset Chromecast manually. This will allow you to use the new Wi-Fi network while erasing the old one.
The Reset button on Chromecast is located next to the micro-USB port on the device. It should be held down for 15 seconds after being pressed.
Because the device’s light will flash while you are holding down the button, release it when the light stops blinking and remains illuminated.
Your Chromecast will reboot and restore itself to its factory default settings at this point. In addition to wiping out the old Wi-Fi network, the device also wipes out all current settings. As a result, the configuration process is restarted. Once you’ve connected Chromecast to the new Wi-Fi network, you’re ready to go.
If you’ve forgotten how to do something or if you’ve had someone else do it for you, follow the instructions below.
Installing Chromecast on an Android or iPhone After a Factory Reset
To re-establish Chromecast, you must leave the device connected to the television until the white light flashes.
- In the Google Home app, select the plus sign (+) to add a new Google Home device.
- Select Device Configuration > Installing >
> The Home can be selected or a new one created. Simply click the next button to continue. - Select the option to proceed by touching the button when the screen displays “Chromecast Found.
- If the code displayed on your smartphone and TV are the same, pick the Yes option.
- Select Yes, I’m in if you’re okay with Google having access to your device data; otherwise, tap No, thanks.
- Identify the device’s position by selecting the suitable option (Attic, Basement, Bathroom, etc.)
- It is time to give the chamber a name.
- Select the choice for a wireless network. Ensure that both your mobile device and Chromecast are linked to the same Wi-Fi network.
- Google Home can receive the WiFi password from your phone.
- Follow the on-screen instructions by clicking Next to sign in using your Google account, or tap Not now to skip this setup.
- Select Continue to continue.
A factory reset and the aforementioned setup process are still required if you wish Chromecast to connect to a new WiFi network.
If the Chromecast isn’t receiving sufficient power from the micro USB port on the TV, black screens and “no signal” errors may occur. Once the USB cable is plugged into the wall charger rather than the TV’s USB port, the issue should be cured.
